100 Watt Max Power
1 in - 25 mm voice coil, copper wire
Rubber sorround
Neodymium magnet assembly
PA systems application
16 Ohm available
General Specifications |
Nominal Diameter | 6 in - 160 mm | |
---|---|---|
Nominal Impendance | 8 Ohm | |
Nominal Rdc | 6.5 Ohm | |
Power handling (AES) (*) | 50 Watt | |
Max Power | 100 Watt | |
Minimum Impedance | 7.08 Ohm | |
Frequency Range | 80 ÷ 20000 Hz | |
Voice Coil Diameter | 1 in - 25 mm | |
S.P.L. (1w, 1m) | 91.5 dB | |
Nominal Fs | 85 Hz | |
Flux Density | 1.27 T | |
Sinusoidal Test Voltage | 11 V |
Life Test (*) | ||
Box Volume | 14 liters | |
---|---|---|
Input Signal | Pink noise | |
Band Pass Filter | 80 - 20000 Hz, 12 dB/oct | |
Test duration | 2 hours |
Frequency Response | IEC baffle | |
---|---|---|
Impendance | (Iac=10m A) |
Net weight | 0.82 Kg | |
---|---|---|
Overall Diameter | 165 mm | |
Overall Depth | 69 mm | |
Baffle Cut Diameter | 145 mm | |
Mounting holes number | 4 | |
Mounting holes diameter | 4.7 x 6.3 mm | |
Mounting bolt diameter | 155 mm |
Frame Material | Stell | |
---|---|---|
Voice Coil Former Material | Aluminium | |
Voice Coil Wire | Copper | |
Cone Material | Paper | |
Cone Shape | Exponential | |
Surround Material | Rubber | |
Surround Shape | Half roll | |
Suspension Material | Doped Nomex fabric | |
Magnet Type | Neodymium | |
Magnet Weight | 148 g |
Qms | 4.82 | |
---|---|---|
Qes | 0.69 | |
Qts | 0.60 | |
Fs | 82.80 Hz | |
Re | 6.30 Ohm | |
Mms | 10.28 g | |
Cms | 0.36 mm/N | |
Bl | 7.01 t*m | |
Sd | 132.73 | |
Vas | 8.88 liters | |
u0 | 0.71 % | |
XMax | 1.9 mm | |
Le | 0.03 mH | |
Rms | 1.11 Kg/s | |
Efficiency Bandwidth | 120.76 |
ELENCO PRODOTTI