60Watt Max Power
1 in Horn throat diameter
Flat Titanium diaphragm
38 mm (1.50 in) voice coil, aluminium wire
Neodymium magnet assembly
16 Ohm available
Measurement executed in free air (1m) in semi-anechoic chamber
+ Plane Wave Tube
Applied RMS Voltage is set to 2.83 V for 8 Ohm nominal impedance
Impedance module related to driver in free air
Frequency response with driver mounted on: PR312
Throat Diameter |
1 in - 25.4 mm |
|
Nominal Impendance |
8 Ohm |
|
Minimum Impedance |
7.2 Ohm |
|
Direct Current Resistance (Re) |
5.6 Ohm |
|
Minimum Crossover Frequency (1) |
2 kHz |
|
Sensitivity (1W/1m) (2) |
108 dB |
|
Frequency Range |
1.2 ÷ 18 kHz |
|
AES Power (3) |
30 Watt |
|
Program Power (4) |
60 Watt |
|
Diaphragm Material |
Flat Titanium |
|
Voice Coil Diameter |
38 mm (1.5 in) |
|
Voice Coil Winding Material |
Aluminum |
|
Voice Coil Former Material |
Kapton |
|
Phase Plug Material |
Reinforced plastic polymer |
|
Magnet Material |
Neodymium |
|
Full Throat Angle |
25.3 degree |
|
BL Factor |
4.6 N/A |
|
Flux Density |
1.52 T |
|
Inductance (Le) |
0.061 μH |
|
Notes (*) |
(1) |
Minimum Crossover Frequency require a 12 dB/oct or higher slope high-pass filter. |
(2) |
Sensitivity is measured at 1 m on axis from the mouth of horn, averaged between 1 kHz and 4 kHz. |
(3) |
AES Power rating is a test made for 2 hours with Pink Noise signal having a 6 dB Crest Factor from minimum crossover frequency. Power calculated on minimum impedance. Driver mounted on plastic horn. |
(4) |
Program Power rating is defined as 3 dB greater than AES rating and is aconservative expression of the transducer ability to handle music program material. |
Net weight |
0.40 kg (0.88 lb) |
|
Overall Diameter |
60 mm (2.36 in) |
|
Mounting holes diameter |
2 x M5 holes 180° |
|
Mounting bolt diameter |
76 mm (2.99 in) |
|
Total Volume Size |
0.12 dm3 (0.004 ft3) |
|
Total Depth |
52 mm (2.05 in) |
|
Units per Shipping Box |
12 units |
|
Shipping Box Size (mm) |
305 x 295 x 210 mm |
|
Shipping Box Size (in) |
12 x 11.6 x 8.3 in |
|