100 Watt Max Power
1 in - 25 mm voice coil, copper wire
Rubber sorround
Neodymium magnet assembly
PA systems application
16 Ohm available
General Specifications |
Nominal Diameter | 5 in - 129 mm | |
---|---|---|
Nominal Impendance | 8 Ohm | |
Nominal Rdc | 6.5 Hz | |
Power handling (AES) (*) | 50 Watt | |
Max Power | 100 Watt | |
Minimum Impedance | 7 Ohm | |
Frequency Range | 100 ÷ 15000 Hz | |
Voice Coil Diameter | 1 in - 25 mm | |
S.P.L. (1w, 1m) | 92 dB | |
Nominal Fs | 80 Hz | |
Flux Density | 1.3 T | |
Sinusoidal Test Voltage | 11 V |
Life Test (*) | ||
Box Volume | 9 liters | |
---|---|---|
Input Signal | Pink noise | |
Band Pass Filter | 100 - 20000 Hz, 12 dB/oct | |
Test duration | 2 hours |
Frequency Response | IEC baffle | |
---|---|---|
Impendance | (Ias=10m A) |
Net weight | 0.77 Kg | |
---|---|---|
Overall Diameter | 129.5 mm | |
Overall Depth | 59 mm | |
Baffle Cut Diameter | 112.5 mm | |
Mounting holes number | 4 | |
Mounting holes diameter | 5 mm | |
Mounting bolt diameter | 138 mm |
Frame Material | Steel | |
---|---|---|
Voice Coil Former Material | Aluminuim | |
Voice Coil Wire | Copper | |
Cone Material | Paper | |
Cone Shape | Exponential | |
Surround Material | Rubber | |
Surround Shape | Half roll | |
Suspension Material | Doped Nomex fabric | |
Magnet Type | Neodymium | |
Magnet Weight | 148 g |
Qms | 3.26 | |
---|---|---|
Qes | 0.37 | |
Qts | 0.33 | |
Fs | 78.5 Hz | |
Re | 6.11 Ohm | |
Mms | 6.15 g | |
Cms | 0.67 mm/N | |
Bl | 7.10 T*m | |
Sd | 80.12 cm2 | |
Vas | 6.02 liters | |
u0 | 0.76 % | |
XMax | 2.15 mm | |
Le | 0.09 mH | |
Rms | 0.93 Kg/s | |
Efficiency Bandwidth | 213.52 |
ELENCO PRODOTTI