230 Watt Max Power
1.4 in Horn throat diameter
Titanium diaphragm
72 m (2.83 in) voice coil, aluminium wire
Neodymium rings magnet
Measurement executed in free air (1m) in semi-anechoic chamber + Plane Wave Tube
Applied RMS Voltage is set to 2.83 V for 8 Ohm nominal impedance
Impedance module related to driver in free air
Frequency response with driver mounted on: V-Shape Horn PR614
Throat Diameter |
1.4 in - 35.6 mm |
|
Nominal Impendance |
8 Ohm |
|
Minimum Impedance |
6.9 Ohm |
|
Direct Current Resistance (Re) |
5.7 Ohm |
|
Minimum Crossover Frequency (1) |
1.2 kHz |
|
Sensitivity (1W/1m) (2) |
110 dB |
|
Frequency Range |
1.2 ÷ 20 kHz |
|
AES Power (3) |
115 Watt |
|
Program Power (4) |
230 Watt |
|
Diaphragm Material |
Titanium Dome |
|
Voice Coil Diameter |
72 mm (2.83 in) |
|
Voice Coil Winding Material |
Aluminum |
|
Voice Coil Former Material |
Kapton |
|
Phase Plug Material |
Reinforced plastic polymer |
|
Magnet Material |
Neodymium |
|
Full Throat Angle |
10.5 degree |
|
BL Factor |
10 N/A |
|
Flux Density |
1.9 T |
|
Inductance (Le) |
0.074 mH |
|
Notes (*) |
(1) |
Minimum Crossover Frequency require a 12 dB/oct or higher slope high-pass filter. |
(2) |
Sensitivity is measured at 1 m on axis from the mouth of horn, averaged between 1 kHz and 4 kHz. |
(3) |
AES Power rating is a test made for 2 hours with Pink Noise signal having a 6 dB Crest Factor from minimum crossover frequency. Power calculated on minimum impedance. Driver mounted on aluminium horn. |
(4) |
Program Power rating is defined as 3 dB greater than AES rating and is a conservative expression of the transducer ability to handle music program material. |
Net weight |
2.7 kg (5.95 lb) |
|
Overall Diameter |
134 mm (5.28 in) |
|
Mounting holes diameter |
4 x M6 holes 90° |
|
Mounting bolt diameter |
101.6 mm (4 in) |
|
Total Volume Size |
0.51 dm3 (0.018 ft3) |
|
Total Depth |
78 mm (3.07 in) |
|
Units per Shipping Box |
1 unit |
|
Shipping Box Size (mm) |
160 x 160 x 90 mm |
|
Shipping Box Size (in) |
6.3 x 6.3 x 3.5 in |
|